Precision Infrared Calibrator
Digital Communication Interface
25
Commands by Function or Group
In this section, the commands are arranged into the following groups, see Table
• Calibration Commands - commands for the Product calibration parameters.
• Main Screen Commands - commands for parameters displayed on the main screen.
• Program Commands - commands for program setup and status.
• Setup Commands - commands for setting up communication, display, password, measure, and
operation parameters.
• System Commands - commands to report and change the status of the Product.
• Temperature Commands - commands for control temperature and cutout functions.
Table 5. Commands by Function or Group
Screen Parameter
Command
Password
Protection Group
Read/Write
Calibration - Controller
TEMP PB
SOUR:LCON:PBAN
Unconditional
R/W
TEMP INT
SOUR:LCON:INT
Unconditional
R/W
TEMP DER
SOUR:LCON:DER
Unconditional
R/W
Calibration – IR Target
WAVELENGTH
SOUR:CAL:WAV
Unconditional
R/W
(none)
SOUR:CAL:EMIS
N/A
R
IR CAL 1
SOUR:CAL:PAR1
Unconditional
R/W
IR CAL 2
SOUR:CAL:PAR2
Unconditional
R/W
CAL DATE
SOUR:CAL:DATE
Unconditional
R/W
Main Screen
(apparent temperature) SOUR:SENS:DATA [TEMP]
N/A
R
SETPT
SOUR:SPO
N/A
R/W
(graphic)
SOUR:STAB:DATA
N/A
R
(none)
SOUR:STAB:TEST
N/A
R
HEAT %
OUTP:DATA
N/A
R
ENABLE
OUTP:STAT
N/A
R/W
IRT
E
:
SOUR:EMIS
N/A
R/W
CAL
L
SOUR:CAL:WAV
N/A
R/W
°C/°F key
UNIT:TEMP
N/A
R/W
SETPT
SOUR:SPO
N/A
R/W
Setpoint
SETPOINT 1
SOUR:LIST:SPO1
N/A
R/W
SETPOINT 2
SOUR:LIST:SPO2
N/A
R/W
SETPOINT 3
SOUR:LIST:SPO3
N/A
R/W
SETPOINT 4
SOUR:LIST:SPO4
N/A
R/W
SETPOINT 5
SOUR:LIST:SPO5
N/A
R/W
SETPOINT 6
SOUR:LIST:SPO6
N/A
R/W
SETPOINT 7
SOUR:LIST:SPO7
N/A
R/W
SETPOINT 8
SOUR:LIST:SPO8
N/A
R/W
Program - Select
PROGRAM
PROG:SEL
N/A
R/W
Program - Run
TEST STATUS
PROG:STAT
N/A
R/W
Program - Edit
ADVANCE
PROG:PROM:ADV
N/A
W
