2
Specifications and Environmental
Conditions
2.1
Specifications
Temperature
Range
–100°C to 800°C (–73°F to 1472°F)
Accuracy
Capability
†
±1.0°C
Stability
Capability
†
±0.015
Stabilization Time
approximately 30 minutes (depends on system design)
Control Probe
100
Ω
RTD
Resolution
0.01°C/°F
Readout
Switchable °C or °F
Controller
Digital controller with data retention
Fault Protection
Sensor burnout and short protection
Heater Output
(max)
115 VAC (±10%), 50/60 Hz, 7.8 A, 895 W
230 VAC (±10%), 50/60 Hz, 7.8 A, 1790 W
Power (max)
115 VAC (±10%), 50/60 Hz, 8 A, 920 W
230 VAC (±10%), 50/60 Hz, 8 A, 1840 W
NOTE:
Internal electronics require 0.2 A to operate.
System Fuses
10 A 250 V fast acting (max)
Exterior
Dimension
7.2 cm H x 11.4 cm W x 17.8 cm D
(2.85 x 4.5 x 7 in)
Weight
0.9 kg (2 lbs.)
Safety
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC-61010-1
†
Performance is dependent on system design including the control sensor. Capabilities are based on fac-
tory observed performance.
2.2
Environmental Conditions
Although the instrument has been designed for optimum durability and trou-
ble-free operation, it must be handled with care. The instrument should not be
operated in an excessively dusty or dirty environment. Maintenance and clean-
ing recommendations can be found in the Maintenance Section of this manual.
The instrument operates safely under the following conditions:
•
ambient temperature range: 5 - 50°C (41 - 122°F)
•
ambient relative humidity: maximum 80% for temperature <31°C, de-
creasing linearly to 50% at 40°C
•
pressure: 75kPa - 106kPa
9
2 Specifications and Environmental Conditions
Specifications
