1. 25.
Set-point memory 1, 25.°C currently used
To change the set-point memory press “UP” or “DOWN”.
U
Increment memory
4. 40.
New set-point memory 4, 40.°C
Press “SET” to accept the new selection and access the set-point value.
S
Accept selected set-point memory
7.2.2
Set-point Value
The set-point value may be adjusted after selecting the set-point memory and
pressing “SET”.
40.00
Set-point value
If the set-point value need not be changed then press “EXIT” to resume dis-
playing the probe temperature. To adjust the set-point value press “UP” or
“DOWN”.
U
Increment display
42.50
New set-point value
When the desired set-point value is reached press “SET” to accept the new
value and access the temperature scale units. If “EXIT” is pressed, any changes
made to the set-point are ignored.
S
Accept new set-point value
7.3
Temperature Scale Units
The temperature scale units of the controller may be set by the user to degrees
Celsius (°C) or Fahrenheit (°F). The units will be used in displaying the process
temperature, set-point, and proportional band.
The temperature scale units selection is accessed after the set-point adjustment
function by pressing “SET”. From the temperature display function access the
units selection by pressing “SET” 3 times.
25.00 C
Process temperature
S
Access set-point memory
25
7 Controller Operation
Temperature Scale Units
