Pressure Gauge
7
Table 2. Display and Buttons (cont.)
Item Function
MIN MAX records minimum and maximum
pressure values and saves them in
memory. Push
to show maximum
(MAX) indication. Push again to show
minimum (MIN) indication. After 2 seconds,
the gauge goes back to live operation.
To clear the MIN MAX memory values,
push and hold
for 2 seconds until CLr
is shown.
In Configure Mode, push
(
) to move
backward through the menus.
Push to go to setup and configuration
menus.
Push to make a selection. When the
Product is not in Configuration mode, push
to turn on the backlight. Push again to turn
off the backlight.
Item Function
¼ inch NPT Connector
Pressure Display
Engineering Units
Bargraph
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
