manualshive.com logo in svg

Fluke Biomedical ProSim 8 Series, Руководство пользователя

Поделиться
Скачать
Fluke Biomedical ProSim 8 Series Скачать руководство пользователя страница 98

ProSim 8 

Users Manual 

86 

Arrhythmia 

Baseline NSR

 ......................................................... 80 BPM 

PVC Focus

 ............................................................. Left focus, standard timing (except where specified) 

Supraventricular Arrhythmia

 ............................... Atrial fibrillation (coarse or fine); atrial flutter; sinus arrhythmia; missed 

beat (one time); atrial tachycardia; paroxysmal atrial tachycardia; nodal 
rhythm; and supraventricular tachycardia. 

Premature Arrhythmia

 .......................................... Premature atrial contraction (PAC); premature nodal contraction 

(PNC); PVC1 left ventricular; PVC1 left ventricular, early; PVC1 left 
ventricular, R on T; PVC2 right ventricular; PVC2 right ventricular, 
early; PVC2 right ventricular, R on T; and multifocal PVCs 

 

Ventricular Arrhythmia

 ......................................... PVCs 6 per minute, 12 per minute, or 24 per minute; frequent 

multifocal PVCs; bigeminy; trigeminy; multiple PVCs (one-time run of 
2 PVCs, 5 PVCs, or 11 PVCs); mono-ventricular tachycardia (120 BPM 
to 300 BPM in 5 BPM steps); poly-ventricular tachycardia (5 types); 
ventricular fibrillation (coarse or fine); and Asystole 

Conduction Defect

 ................................................ First-, second-, or third-degree heart block; and right- or left-bundle-

branch block 

Advanced Cardiac Life Support 

Shockable Pulseless Arrest Rhythms ................. Ventricular fibrillation (coarse), ventricular fibrillation (fine), unstable 

polymorphic ventricular tachycardia 

Non Shockable Pulseless Arrest Rhythms ......... Asystole 
Symptomatic Bradycardia ................................... Sinus Bradycardia (<60 BPM) 

2

nd

 Degree AV Block, Mobitz Type I 

2

nd

 Degree AV Block, Mobitz Type II 

Complete/3

rd

 Degree AV Block 

Right Bundle Branch Block 
Left Bundle Branch Block 

Symptomatic Tachycardia 

Regular Narrow-complex Tachycardias (QRS <0.12 seconds) 

Sinus Tachycardia ...................................... >150 BPM 
Supraventircular Tachycardia ..................... SVT 

Regular Wide-complex Tachycardias (QRS 

≥

0.12 seconds) 

Sinus Tachycardia ...................................... >150 BPM 
Supraventircular Tachycardia ..................... SVT with aberrancy 

Irregular Tachycardia ...................................... Atrial Fibrillation (Coarse and fine), Atrial Flutter, unstable 

monomorphic ventricular tachycardia (120 BPM to 300 BPM), Torsade 
De Pointes/Polymorphic ventricular tachycardia (long QT interval) 

ECG-Performance-Testing 

Amplitude (peak-to-peak)

 ..................................... 0.05 mV to 0.5 mV (0.05 mV steps) 0.5 mV to 5.0 mV (0.25 mV steps) 

Other leads are proportional to Lead II (reference lead) in percentage 
per: 

Lead I .................................................................. 70 
Lead II ................................................................. 100 
Lead III ................................................................ 30 
Lead V1 through V6 ............................................ 100 

Pulse Wave

 ............................................................ 30 BPM, 60 BPM, with 60 ms pulse width 

Square Wave

 ......................................................... 0.125 Hz, 2.0 Hz, 2.5 Hz 

Triangle Wave

 ........................................................ 0.125 Hz, 2.0 Hz, 2.5 Hz 

Sine Wave

 .............................................................. 0.05 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 25 Hz, 30 Hz, 40 Hz, 50 Hz, 

60 Hz, 100 Hz, and 150 Hz 

Содержание ProSim 8 Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды