Fluke Biomedical ProSim 8 Series Скачать руководство пользователя страница 92

Страница: 92 / 112

ProSim 8

Users Manual

Control the Product Remotely

Ansur test automation systems uses a solutions-based procedure for medical

device tests. Ansur helps you make standard work through test templates and/or

sequences that use your written test procedure. All test results are then

integrated into one test report that you can print or archive. Ansur manages your

test procedures through manual and visual automated test sequences.
The software works hand-in-hand with Fluke Biomedical analyzers and

simulators, that integrates:

•

Visual

inspections

•

Preventive

maintenance

•

Work

procedures

•

Performance

tests

•

Safety

tests

Ansur software uses plug-in modules to interface with a wide array of Fluke

Biomedical instruments. The plug-in module is a software interface to the Ansur

test program. Plug-ins supply test elements used by Ansur Executive that use the

same user interface for all analyzers and simulators supported by an Ansur

plug-in.
When you purchase a new Fluke Biomedical analyzer or simulator, you can

update your existing Ansur software by installing a new plug-in. Each plug-in

module allows you to work only with the options and capabilities you need for the

instrument you are testing.

Maintenance

The Product is a calibrated measurement instrument. Try to prevent mechanical

abuse that could change the calibrated values. The Product has no internal user-

serviceable parts.

Warnings

For safe operation and maintenance of the Product:

•

Repair the Product before use if the battery leaks.

•

Use only Fluke Biomedical approved power adapters to
charge the battery.

To prevent possible electrical shock, fire, or personal injury:

•

Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with
water and get medical aid.

•

Do not disassemble the battery.

Содержание ProSim 8 Series

















































































































Результаты поиска

Содержание ProSim 8 Series

Отзывы:

Бренды по названию

Популярные бренды

Fluke Biomedical ProSim 8 Series, Руководство пользователя

Результаты поиска

Содержание ProSim 8 Series

Отзывы:

Бренды по названию

Популярные бренды