Fluidwell F133-P, Руководство пользователя

Страница: 17 / 48

FW_F133P_v1702_02_EN
Page 17
3.1.9. EXPLANATION OF SETUP MENU 9 - OTHERS
For support and maintenance it is important to have information about the characteristics of the F133-P. Your
supplier will ask for this information when support is required.
MODEL
91 This setting shows the model name.
SOFTWARE VERSION
92 This setting shows the version number of the firmware (software).
SERIAL NO
93 This setting shows the serial number.
PASSWORD
94 This setting is used to set a password (pin code) to limit the access for the
setup menu. Only persons who know the pin code can access the setup
menu. The pin code 0000 disables the pin code to allow for access by any
person.
TAG-NR
95 This setting is used to set a tag number for the F133-P.
4. INSTALLATION
4.1. GENERAL DIRECTIONS

Mounting, electrical installation, start-up and maintenance of this device may only be
carried out by trained persons authorized by the operator of the facility. Persons must
read and understand this manual before carrying out its instructions.

This device may only be operated by persons who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.

Make sure, the measuring system is correctly wired up according to the wiring diagrams.
Protection against accidental contact is no longer assured when the housing cover is
removed or the panel cabinet has been opened (danger from electrical shock). The
housing may only be opened by trained persons authorized by the operator of the facility.

Take careful notice of the "Safety rules, instructions and precautionary measures" at the
front of this manual.
4.2. INSTALLATION / SURROUNDING CONDITIONS
Take the relevant IP classification of the
enclosure into account (see identification plate).
Even an enclosure rated for IP67 / TYPE 4(X)
should NEVER be exposed to strongly varying
(weather) conditions.
When panel-mounted, the front panel of the
F133-P is rated for IP65 / TYPE 4(X)!
When used in very cold surroundings or varying
climatic conditions, inside the instrument case,
take the necessary precautions against
moisture.
Mount the F133-P onto a solid structure to
avoid vibrations.