FW_F115P_v1702_02_EN
Page 35
Set the sensor supply
1. Make the F115-P safe. If applicable, mind the battery power.
2. Open the F115-P and carefully remove the cable-connectors and the protective cover.
3. Find and set the switches and select the V
out
as required.
4. Close the protective cover and install the cable connectors.
5. Close the F115-P.
Risk of electrocution - High voltage!
Make sure, all the leads to the terminals are disconnected from the F115-P and NEVER
connect the mains power supply to the unit when the protection cover has been removed!
Type PD-XI
Power supply in:
16-30V DC / max. 1W
Switch location (typical)
Sensor
Sensor supply out
A
B
1
2
off
off
Coil 1.2V DC; <1mA
Reed 3V DC; <1mA
on
on
8.2V DC; 7mA (max)
Fig. 27: Switch position voltage selection type PD-XI
5.3. CONFIGURATION EXAMPLES INTRINSICALLY SAFE APPLICATIONS
Fig. 28: F115-P-AP-CT-OT-(PD)-XI - External power supply - IIB/IIC
– IIIC