Fluidwell F030-A, Руководство пользователя

Страница: 6 / 56

Page 6
FW-F030-P-M_v0404_01_EN.docx
1 INTRODUCTION
1.1 SYSTEM DESCRIPTION OF THE F030-P
Functions and features
The batch controller model F030-P is a microprocessor driven instrument designed for batching and
filling of small batch sizes up to medium large quantities as well as displaying total and accumulated
total.
This product has been designed with a focus on:
•
ultra-low power consumption to allow long-life battery powered applications (type PB / PC);
•
intrinsic safety for use in hazardous applications (type XI);
•
several mounting possibilities with GRP, aluminum or stainless steel 316L enclosures for
industrial surroundings,
•
ability to process all types of flowmeter signals;
•
one control output for controlling a pump or valve.
Flowmeter input
This manual describes the F030-P with a pulse type input from the flowmeter "-P version". Other
versions are available to process (0)4-20mA or 0-10V flowmeter signals.
One flowmeter with a passive or active pulse, Namur or coil signal output can be connected to the
F030-P. To power the sensor, several options are available.
Fig. 1: Typical application for the F030-P.
Configuration of the F030-P
The F030-P has been designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F030-P according to your specific requirements.
It includes several important features, such as K-Factor, measurement units, signal selection etc. All
settings are stored in EEPROM memory and will not be lost in the event of power failure. To extend
the battery-life time, please use of the power-management functions as described in chapter 3.3.2.
Display information
The F030-P has a large transflective LCD with all kinds of symbols and digits to display measuring
units, status information, count up or down and key-word messages.
A backup of the total and accumulated total in EEPROM memory is made every minute.
Options
The following options are available: intrinsic safety, mechanical relay or active outputs, power- and
sensor-supply options, panel-mount, wall-mount and weather-proof enclosures, flame proof
enclosure and LED backlight.
Overview typical application F030