E110-P
User Manual
FW_E110-P_M_v0301-01_EN
Page 41
6.3.2
MECHANICAL DIMENSIONS
Right connection
M20x1.5
M25x1.5
½” NPT
¾” NPT
M20x1.5
M25x1.5
½” NPT
¾” NPT
1” NPT
Bottom connection
1
3
3
m
m
/
5
.2
4
”
148mm / 5.83”
70mm / 2.76”
7
3
m
m
/
2
.8
7
”
3
5
m
m
/
1
.3
8
”
112mm / 4.41”
Left connection
M20x1.5
M25x1.5
½” NPT
¾” NPT
65
Fig. 27:
Mechanical dimensions of the E-Series enclosure
6.3.3
MOUNTING THE UNIT
The Main Electronics Module (MEM) can be placed into the body in 4 directions (0° – 90° – 180° –
270°). This allows the unit to be mounted in any direction while still allowing the MEM to be installed
in a ‘readable’ position.
left
right
center
By rotating the unit, the process and conduit openings can be placed in the required direction.
Note that the thread sizes of the openings indicated by “left – right – center” correspond with the
information on the configuration label attached to the outside of the product.
