/ 8 /
INSTALLING THE WATER BLOCK
STEP 1
PLACING THE BLOCK ON TO THE GRAPHICS CARD
Carefully position the water block with preinstalled standoffs on to the graphic
card. During this process please make sure you align mounting holes on the
PCB with holes on the water block. Also pay attention not to use too much force.
STEP 2
ATTACHING THE BLOCK TO THE GRAPHICS CARD
Use a Phillips screwdriver,screw with the enclosed M2.5X4 AX1 screws. EKWB
recommends users to start tightening the screws around the GPU core and
continue outwards.
STEP 1
STEP 2
Plastic washer
Screw M2,5x4 AX1
