Flowserve StarTalk DTM, Быстрый старт

Страница: 142 / 398

StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
Step Test Compare
The Step Test Comparison page displays two previously saved step test files for an overlay comparison.
The comparison includes file information, step test settings, and graphed data. Difference data is also
displayed on the graphs.
The File Information area allows the user to load two files. The files are loaded by selecting the "1..."
and "2..." buttons. This area then shows the tag ID, the date the file was saved, and the file name for
each file.
The
Graph Settings
area allows the user to select which information will be displayed on the graphs.
The user can select between data sets from file 1, file 2, and the differences. Each difference data point
is calculated by subtracting the value of the data point in the second file from the corresponding data
point in the first file.
The Step Test Settings area contains the information used to run the step test and any other
information that may affect the results. This information is shown for each file in a side-by-side
comparison.
The graphs are identical to those shown in the step test (Step Test, Process, Pressure vs. Position); but,
they each show the data for both files along with differences between the two files.