
Argus Ball Valve EK, FK and HK Operating Manual – BA1000 EN
5 Installation
Page 32 of 67
5
Installation
5.1
Safety Messages
In order to prevent personal injury and/or property damage, ensure that
installation work is only carried out by qualified personnel with appropriate
personal protective equipment (PPE) and suitable work tools.
See Chapter 2 Safety Information.
Risk of injury due to improper welding procedures on pressurized piping!
Improper welding procedures on pressurized piping may cause severe
injury or death.
Observe local welding regulations, provisions, instructions, and
specifications as well as specific safety requirements when welding.
Ensure that welding is only carried out by qualified personnel with
appropriate protective equipment.
Risk of property damage due to excessive heat!
In the case of short welding ends, excessive heat from welding works may cause
damage to the soft seal.
Observe the procedures in the following embedded safety messages.
5.2
Preparing the Flange and Welded Installation
Observe the following safety measures before installing the Argus Ball Valve:
Ensure that the piping is strong enough to safely bear the Argus Ball Valve and its
accessories.
Before installing the Argus Ball Valve, ensure that the piping is clean and free of any fluids
or other substances.
Make sure there is sufficient clearance above and to the side of the Argus Ball Valve and
attachments to ensure maintenance and/or repair work without risk.
If the Argus Ball Valve is intended for regular manual operation, provide a standing area
for the operator so he or she can safely apply the necessary forces.