background image

Safety • Installation    

2

For parts or assistance, call Flotec Customer Service at 

800-365-6832

Important Safety Instructions

SAVE THESE INSTRUCTIONS - This manual contains important 
instructions that should be followed during installation, 
operation, and maintenance of the product. 

 This is the 

safety alert symbol. When you see this symbol on your pump 
or in this manual, look for one of the following signal words 
and be alert to the potential for personal injury!

 indicates a hazard which, if not avoided, will 

result in death or serious injury.

 indicates a hazard which, if not avoided, could 

result in death or serious injury.

 indicates a hazard which, if not avoided, could 

result in minor or moderate injury.
NOTICE addresses practices not related to personal injury.
Carefully read and follow all safety instructions in this manual 

and on pump.
Keep safety labels in good condition. Replace missing or 

damaged safety labels.

California Proposition 65 Warning

 This product and related accessories contain 

chemicals known to the State of California to cause cancer, 

birth defects or other reproductive harm.

 Risk of sudden starts. Can cause electrical 

shock and personal injury. The pump motor is equipped with 

an automatically resetting thermal protector and may restart 

unexpectedly.
DO NOT plug in the pump while standing in water or on a wet 

or damp surface.
DO NOT use in water where fish are present (oil in motor can 

kill fish).
DO NOT pick up the pump by the power cord.
Protect the electrical cord from sharp objects, hot surfaces, oil, 

and chemicals. Avoid kinking the cord.
Unplug the pump before servicing it or attempting to clean it.
Secure the discharge hose before starting the pump. An 

unsecured discharge hose may whip, which can cause personal 

injury and property damage.
Keep the pump, base, and inlet screen free of debris and 

foreign objects. 

Specifications

Power supply required ........................................ 115V, 60 HZ.
Liquid Temp. Range .......................................Max. 77°F (25°C)
Operation Position ........................................................Vertical
Individual Branch Circuit Required  ............................. 15 Amp
Operating Depth 

Beginning min ............................. 3/4”

(water level) 

Ending max. ................................. 1/4”

Discharge ........................................................ 1” NPT (25 mm)
NOTICE This unit is not designed for applications involving salt 

water or brine! Use with salt water or brine will void warranty.

Performance

Installation

 Risk of electric shock. Can shock, burn or kill. Do 

not use power cord to lift motor. Always use handle.
1.  Pump should always stand upright on base when operating. 

Do not suspend pump by means of discharge hose or 

power cord. Keep pump inlet screen clear.

2.  To install a garden hose, first install adapter provided with 

pump.

 

NOTICE To keep friction as low as possible, hose must be 

5/8” or larger. Keep hose as short as possible.

3.  If, in your application, backflow is a problem when the 

pump stops, prevent it by installing a 1” NPT check valve 

in the pump discharge.

4.  Power Supply: Pump is designed for 115V., 60 HZ. 

operation and requires an individual branch circuit of 15 

amperes or more capacity. It is supplied with a 3-wire cord 

set with grounding-type, GFCI protected plug for use in a 

3-wire, grounded outlet. For safety, pump should always be 

electrically grounded to a suitable electrical ground such 

as a grounded water pipe or a properly grounded metallic 

raceway or ground wire system. Do not cut off the round 

grounding prong.

 

 Risk of sudden starts. Can cause electrical 

shock and personal injury. The pump motor is equipped 

with automatic resetting thermal protector and may restart 

unexpectedly. Protector tripping is indication of motor 

overloading as a result of operating pump at high pressure, 

excessively high or low voltage, inadequate wiring, 

incorrect motor connections, or a defective motor or pump.

GPH (LPH) AT TOTAL FEET (M)

 

3’  5’  10’ 15’ 18’ 20’ 22’ 

 

(0.91) (1.52) (3.05) (4.57) (5.49) (6.09)  (6.70)

 1600 gal  1524 gal  1260 gal  924 gal  648 gal  372 gal 

0 gal 

(6 057 L)  (5 769 L)  (4 770 L)  (3 498 L)  (2 453 L)  (1 408 L) 

(0 L)

Содержание FP0S1790PCA

















Отзывы: