FLORABEST 93500, Перевод оригинального руководства по эксплуатации

Страница: 37 / 52

37
GB
- During all maintenance and clean-
ing work
- When the power cable is damaged
or has become tangled
- When the implement hits an obstruc-
tion during work or when unusual
vibrations arise. Establish the cause
and see if the implement has been
damaged. Do not repair it yourself!
Have the implement repaired by an
authorised workshop!
• Store the implement in a dry place
well out of reach of children.
CAUTION! The following states
how to avoid damage to the imple-
ment and any resulting harm to
people:
Take care of your implement
• Switch off the power when the imple-
ment is to be carried across steps.
• Inspect the implement each time before
it is to be used. Never operate the im-
plement if safety devices (e.g. impact
protector, parts of the cutting facility
or bolts are missing, worn out or dam-
aged. Check especially the power
cable and starting lever for damage.
To avoid imbalance, all tools and bolts
must be exchanged as complete sets.
• Only use spare parts and accessories
that have been supplied or recom-
mended by the manufacturer. The use
of alien parts results in the immediate
loss of all guarantee claims.
• Ensure that all nuts, bolts and screws
are firmly tightened and that the imple -
ment is in a safe working state.
• Never try to repair the implement your-
self, other than you have been trained
accordingly. All work that has not
been listed in these Instructions must
only be carried out by authorised serv-
icing agencies.
• Treat the implement with the greatest
care. Always keep the tool clean for
better and safer work. Follow the main-
tenance instructions.
• Never overload the implement. Always
work within the specified capacity
range. Do not use low-power machines
for heavy-duty work. Do not operate the
implement for purposes for which it is not
intended.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due to
electric shock:
• Before each use, carry out a visual
inspection of the power and extension
cables for signs of damage or ageing.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per -
son in order to prevent hazards.
• Keep the power cable well away from
the cutting tools. Should the power
cable become damaged during work,
then instantly disconnect the power
cable from the mains.
DO NOT touch the power cable
before it has been disconnected
from the mains.
• Keep the extension cables away from
the teeth. The teeth may damage the
cables and result in contact with live
parts.
• Check that the mains voltage is the
same as indicated on the rating plate.
• Connect the implement to a power
socket with a residual-current circuit
breaker that has a rated current of not
more than 30 mA.
• Avoid body contact with earthed parts
(e.g. metal fences, metal posts).
• Only use approved extension cables
of the type H05RN-F with a maximum
length of 75 m and which have been
approved for open-air use. The strand-