Floorex Products DM-2780, Инструкция по безопасности и эксплуатации

Страница: 10 / 12

DM-2780 Safety & Operators Manual
1800 FLOOREX
PAGE 9. 1800 356 673
Problem Solving
This Is a Guide Only. Consult Your Supplier for Your Application
PROBLEM CAUSE REMEDY EXPLANATION
The Dust
Extractor will
not start / run. No power is
present at cable
PowerPoint. Check the power is
present with another
tool. Using another tool confirms power is
present
An overload has
tripped Have a qualified
person check the
machine for faults There is always a reason for the trip.
You are best to find out why before
proceeding.
The Dust
Extractor is not
sucking at all. The head is not
fitted correctly Make sure the head is
correctly positioned on
the main bowl and
firmly against the seal. If the bucket is not against the seal
firmly air can come in and reduce the
air flow and or suction.
The seal is
missing at the
Bottom Check the seal by eye
and feel around the
seal area for leaks and
replace or re fit. If the seals are not correctly fitted or
missing the air flow and or suction will
be greatly reduced.
The filters are
blocked. Check the rotary filter
cleaning is not working
The filter system
not working
correctly or
switched on. Have Qualified
persons check the
Dust Extractor system
and rectify the problem
by replacing the faulty
part. Restores the filter cleaning
mechanism.
The Dust
Extractor seems
to have lost
suction over a
period of time
on the job. The dust bin is
over full. Empty the dust bin.