Technical Guide
CN-IC1-12
Title
:
i-Controller Visograph Navigation REV.201.05
EXTERNAL
8
1-5JULY2021
System Status
To navigate to the System Status menu options, press the
corresponding key on the Visograph below the menu
item number. Press the
(T1) button to return to the
Main Menu.
1.
Temperature Status
–
View the current
temperature in the treated space, space dew point,
supply duct temperature, return air temperature,
or outdoor conditions.
2.
Compressor Status
–
View the current compressor
and suction pressure status.
3.
Operation Mode Status
–
View the current
operation mode (Dehumidification, cooling, or
heating), reheat or reclaim status, current
occupancy, and other key system parameters.
4.
Condenser Status
–
View the current condenser
fan status.
5.
Heat Status
–
View the current heating operation
mode and stage status.
6.
Optional Eq Status**
–
View current status of
optional connected equipment. This includes VAV
zones, ERV wheels, Power Exhaust, or Zone
thermostat inputs. Status will only appear if
optional equipment is present.
7.
Energy Meter
–
View current power consumption.
** If Equipped
Figure 13. System Status screen
T1: Go to Main Menu
T2: Go to Temperature Status
T3: Go to Compressor Status
T4: Go to Operation Mode
T5: Go to Condenser Status
T6: Go to Heat Status
T7: Go to Optional Equipment Status**
T8: Go to Energy Meter**
Temperature Status
There are 2 temperature status screens that display the
reading of various temperature sensors throughout the
unit. NOTE: when an asterisk (*) is displayed to the right
of the value, the value is in override.
Use the
(T7) and
(T8) buttons to navigate
between the two “Temperature Status” pages. Press
(T1) to return to the System Status Menu.
1.
Space Temperature:
Temperature reading from
temperature probe mounted in the space.
2.
Space Dew Point:
Dew point calculated from the
temperature and humidity probe readings
mounted in the space.
3.
Supply Temperature:
Temperature reading from
temperature probe mounted in the supply air duct.
4.
Return Air Temperature:
Temperature reading
from temperature probe mounted in the return air
duct.
5.
Outdoor Air Temperature:
Temperature reading
from temperature probe mounted in underneath
the rain hood on the
Flō
unit.
