(877) 356-5463 | (p) 330-331-7331 | (f) 330-331-7172 | www.FLO-CORP.com | © 2017 FLO-CORP | REVA 1116
2
Introduction
Please read carefully! No liability can be accepted for damage caused by improper use or installation of the Tracer 1000 Level Transmitter.
Featuring TDR (Time Domain Reflectometry) technology, the Tracer 1000™ provides continuous radar level measurement
and point level detection in liquids and solids, with analog and switching output. This innovative radar device has almost
no installation restrictions – the 1” radar beam can be mounted in small tanks, tall and narrow nozzles and it measures
precisely even with difficult tank geometries or close to interfering structures. Factory settings may be configured via
HART® Communication protocol. Tracer 1000 is ideal for various types of processing and storage applications and has
an exceptional performance in liquids even with low reflectivity such as light oils and hydrocarbons.
Safety Precautions
I
f you are unsure of the suitability of a Tracer 1000 for your installation, please consult your FLO-CORP representative for
further information.
NOTE: REMOVE ALL PACKING INSERTS BEFORE OPERATING LEVEL TRANSMITTER.
Authorized Personnel
All operations described in this operating instructions manual must be carried out only by trained specialist personnel
authorized by the plant operator. During work on and with the device the required personal protection equipment must
always be worn.
Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to application-specific hazards, e.g. vessel over fill or damage
to
system components through incorrect mounting or adjustment.
General Safety Instructions
The user must take note of the safety instructions in this operating instructions manual , the country specific installation
standards as well as all prevailing safety regulations and accident prevention rules. The instrument must only be operated
in a technically flawless and reliable condition. The operator is responsible for trouble-free operation of the instrument.
During the entire duration of use, the user is obliged to determine the compliance of the required occupational safety
measures with the current valid rules and regulations and also take note of new regulations.
Disclaimer
The information contained in this document is subject to change without notice. FLO-CORP makes no representations or
warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness
for a particular purpose.
