FLIR ThermaCAM P65, Руководство пользователя

Страница: 113 / 246

■
You can also beam PocketWord (*.psw) files from a PDA to the text comment dialog
box. The text in the PocketWord file will be accepted as a value if you you beam
the file when the second tab in the text comment dialog box is displayed. If you
beam the file when any other tab is displayed, the text will be accepted as a label.
■
Using the text comments command requires that a CompactFlash card with the
appropriate *.tcf file is inserted into the camera, or that the file is stored in the
camera’s internal flash memory. To make the text strings load, it is important that
the *.tcf file is saved on image root level or in the directory where the images are
saved on the CompactFlash card. If the images are saved in the internal flash
memory, the *.tcf file should be in the same directory as the images.
■
For more information about using the text comment editor in ThermaCAM Reporter
7.0, consult any of the following manuals:
□
ThermaCAM Reporter 7.0 Bedienungsanleitung (1 557 792)
□
ThermaCAM Reporter 7.0 Manuel d’utilisation (1 557 790)
□
ThermaCAM Reporter 7.0 Manual del usuario (1 557 794)
□
ThermaCAM Reporter 7.0 Manuale dell'operatore (1 557 796)
□
ThermaCAM Reporter 7.0 Operator's manual (1 557 788)
10.2.2.8 Image description
10567403;a2
Figure 10.17 Image description dialog box, indicating that the camera is waiting for a *psw file.
Point to Image description and press the joystick to display the Image description
dialog box.
Using the image description feature, you can add a brief description to an image by
using a Pocket PC and the IrDA infrared communication link on the camera. The image
description can then be read out by other software – e.g. FLIR Systems ThermaCAM™
QuickView.
The valid import format for an image description is *.psw files.
➲
You will need to enable IrDA in the Power Setup dialog box before beaming any
files to the camera.
10
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
97
10 – Camera program