FLIR ThermaCAM EX320, Руководство пользователя, Страница: 15 / 168

1 Warnings & cautions
10474103;a1
■
This equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual, may cause inter-
ference to radio communications. It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
■
An infrared camera is a precision instrument and uses a very sensitive IR detector.
Pointing the camera towards highly intensive energy sources – such as devices
emitting laser radiation, or reflections from such devices – may affect the accuracy
of the camera readings, or even harm – or irreparably damage – the detector. Note
that this sensitivity is also present when the camera is switched off and the lens
cap is mounted on the lens.
■
Each camera from FLIR Systems is calibrated prior to shipping. It is advisable that
the camera is sent in for calibration once a year.
■
For protective reasons, the LCD (where applicable) will be switched off if the detector
temperature e60 °C (+149 °F) and the camera will be switched off if the
detector temperature e68 °C (+154.4 °F).
■
The camera requires a warm-up time of 5 minutes before accurate measurements
(where applicable) can be expected.
1
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
1