FLIR TCX series Скачать руководство пользователя страница 76

Страница: 76 / 150

Connecting to Cameras with FLIR Cloud™ CMS

3. Log into the Client Software using the Client Software user name (default:

admin

)

and password (default:

admin

) and then click

Login

9.3

Adding a Camera over the Local Network (LAN)

You can add cameras over a local network (LAN). The software will automatically scan
the network for compatible cameras.

Prerequisites:

• Connect the network camera to a router or switch on the network.
• Install FLIR Cloud™ Client on a computer in the same network as the network camera.

To add a camera over the LAN:

1. Click

and then click

2. The client scans your LAN for connected cameras. Check your camera (a) and click

Add

(b).

3. Enter the password for your system (default:

admin

) and click

4. Click

then

#LX400062; r.30885/35920; en-US

Содержание TCX series























































































































































Результаты поиска

Содержание TCX series

Отзывы:

FLIR TCX series, Инструкция по эксплуатации, Страница: 76 / 150

Результаты поиска

Содержание TCX series

Отзывы: