FLIR Raymarine Rotavecta Z195, Руководство по установке

Страница: 20 / 36

4.1 Mounting options
The Rotavecta can be surface or rail mounted.
1 2
D13104-1
1. Surface mount
2. Rail mount
4.2 Surface mounting
Follow the steps below to surface mount your unit on
a mast top or radar arch.
D13105-1
Surface mounting the unit on a horizontal surface
will provide optimum performance. If the mounting
surface is not horizontal, use a packing wedge (not
supplied) to make sure that the unit is vertical.
D13106-1
1. Using the retaining ring mark out the location of
the screw holes on the mounting surface.
2. Drill the 2 screw holes using a suitable sized drill
bit.
3. Pass the cable through the retaining ring and nut.
4. Fit the retaining ring to the base of the unit.
5. Secure the unit to the retaining ring using the nut.
6. Align the screw holes in the seal with the 2 drilled
holes in the mounting surface.
7. Place the seal on the mounting surface so that
the screw holes line up with the drilled holes in
the mounting surface.
8. Position the rotavecta on top of the seal so that
the retaining ring holes line up with the drilled
holes in the mounting surface.
9. Secure the unit to the mounting surface using the
screws provided, ensuring that the cable feeds
through the retaining ring’s cable channel.
D13107-1
20 Rotavecta