FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 49 / 146

43 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
9.3.1 System
The System screen is used for entering the camera’s friendly name and date and time settings. Click the
System tab in the sidebar. The System screen is displayed.
System Screen
The System screen includes the following fields:
Host Name
The host name is for camera identification. If the alarm function is enabled and is set to send an alarm
message by Mail or FTP, the host name entered here is displayed in the alarm message. See
Events
Setup .
Time Zone
Select the time zone from the drop-down menu.
Enable Daylight Saving Time
To enable daylight saving time, check the box and then specify time offset (number of hours or minutes
difference between daylight saving time and standard time), start date and time for daylight saving time,
and end date and time for daylight saving time. The format for time offset is [hh:mm:ss]. For example, if the
amount of time offset is one hour, enter 01:00:00 in the field.
Time format
Enables a choice of formats: either year, month and day (yyyy/mm/dd) or day, month and year
(dd/mm/yyyy).