FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 99 / 164

91
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
Note:
This option works only if the microSD/SDHC card is installed in the camera.
9.3.13 Schedule
The Schedule screen is used for setting schedules for the network failure detection, tampering and motion
detection functions. The functions in this tab allow administrators to create customized schedules for the
camera that uses this option. If a schedule exists, the administrator can apply that schedule to this
camera using the available drop-down list. See figure below.
Schedule Screen
To access the schedule function, open the Main window, select the System tab, and click the Schedule
tab.
Note:
This application is not the same as the Recording Schedule function. It is not used for recording live
video.
To create a new schedule or edit an existing schedule
1. Select the appropriate checkbox for the day(s) of the week (Sun, Mon, Tue, Wed, Thu, Fri and Sat)
to create a schedule.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click Save to apply the newly created schedule to the camera.
To remove a schedule
1. To remove a schedule, select the setup data line by line.
2. Click Delete to remove.