FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 77 / 164

69
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
To add or delete an IP address
1. Enter the IP address in the Filtered IP Addresses text box.
2. Click Add to add a new filtered address. The Filtered IP Addresses box shows the currently
configured IP addresses. Up to 256 IP address entries may be specified.
3. To remove an IP address from the list, select the IP address and then click Delete .
9.3.2.4 IEEE 802.1X
The camera is allowed to access a network protected by 802.1X/EAPOL (Extensible Authentication
Protocol over LAN). Users must contact the network administrator to obtain certificates, user IDs, and
passwords.
IEEE 802.1X/EAP-TLS Screen
CA Certificate
The CA certificate is created by the Certificate Authority for the purpose of validating itself. Click Browse to
locate the file and Upload to upload the certificate to check the server’s identity.
Client Certificate
Upload the Client Certificate to authenticate the camera. Click Browse to locate the file and Upload to
upload the certificate.
Private Key
Upload the Private Key to authenticate the camera. Click Browse to locate the file and Upload to upload
the private key.
Settings
· Identity – Enter the user identity (user name) associated with the certificate. Up to 16 characters
can be used.
·
Private Key Password – Enter the password associated with the user identity. Up to 16 characters
can be used.
· Enable IEEE 802.1X – Select the checkbox to enable IEEE 802.1X security. The setting is
disabled by default.
Click Save to save the IEEE 802.1X/EAPTLS setting.