FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 68 / 164

September 12, 2016
60
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
·
Expand PTZ Control Panel
Use the PTZ control panel to quickly and easily control iris, angle, tilt, and zoom
settings for the Live View pane, and to run Presets, Pattern lines, and Sequence
paths.
Click this button to expand the PTZ control panel:
·
The PT Speed setting controls the rate at which the pan and tilt changes. Set a
number between 1 and 10 as the PT Speed every time users pan or tilt the camera
via the Pan & Tilt Direction Control Panel.
·
To stop running a Pattern or Sequence path, move the cursor to the Live View pane
and move the camera in any direction.
·
Select a Preset/Pattern/Sequence line and start it by clicking the Run button.
See PTZ Settings for detailed information about these functions.
·
Live View Pane Pan/Tilt Control
Control pan/tilt by left-clicking the cursor in the Live View pane and dragging the
pointer in any direction. Placing the pointer close to the center of the image results
in a slow rate of change. Placing the pointer further from the center results in a more
rapid rate of change.
9.3
System Tab
The Settings tab in the Navigation Bar opens the sections in the sidebar that are used for configuring the
camera.
Each category in the sidebar is explained in the following sections.
Note:
The System screen is accessible only by the Administrator.