Operation
CB-640x Installation and User Guide Revision 100
February 2021
42
This document does not contain any export-controlled information.
To delete a privacy zone:
Select the privacy zone.
Under
Zone Setting
, click
Clear
. The privacy zone is immediately deleted. You do
not
need to click
Save
.
For each privacy zone you want to delete, repeat the above steps.
4.9 Motion Page
On the Motion page, you can:
•
Enable or disable motion detection.
•
Define the motion detection zone (also known as the region of interest).
•
Configure the motion detection sensitivity.
Figure 44: Motion Page
Note
If the camera is connected to a VMS that supports cell-based motion detection, FLIR recommends
using the VMS to configure the motion detection zone.
To enable motion detection and define the detection zone:
Move the
Enable
slider to the right. By default, motion detection is disabled.
Specify the
Sensitivity
between
1-100
, with
100
being the highest level of sensitivity and
1
being the
lowest.
Using your mouse, define the detection zone. You can:
•
Click and drag on the Live View window to define a detection zone.
•
Click once to add a single cell to the detection zone.
•
Right-click once on a single cell to delete it from the detection zone.
•
Right-click and drag to delete cells from the detection zone.
The detection zone appears as blue cells in the Live View window.
Click
Save
.
