Operation
CB-640x Installation and User Guide Revision 100
February 2021
37
This document does not contain any export-controlled information.
•
B/W
: Locks camera in nighttime mode.
Image Rotation
:
•
Flip
: Flips the image upside-down.
•
Mirror
: Displays the image from a different angle.
•
Both
: Displays the image upside-down from a different angle.
•
OFF
(default).
Video Format
: Select the desired video format,
PAL
or
NTSC
(default). Then, click
Save
. The camera
reboots.
Where relevant, changing the settings on the Visible page immediately affects the live visible video
images and streams. To save changes, click
Save
. To discard changes and revert to the last saved
settings, click
Reset
.
4.5 I/O Page
The I/O page enables you to configure the camera’s alarm input and output pin states.
Figure
37
: I/O Page - Alarm Input Pin Settings
To configure the alarm input pin state:
1. Click
Input
.
2. Click
Alarm
.
3. Select whether the display state of the alarm input pin is
On
or
Off
.
4. Select the state in which the alarm input pin is not alarmed:
Open
(default) or
Closed
.