background image

HD-Analog

Language

Video Format

Backlight

OFF

WDR  (MPX only)

BLC

HLC

DNR

Advanced

Lens

ELC

ALC

Exposure

Brightness

Shutter

Sens-Up

AGC

White Balance

Auto

ATW

Preset

Manual

Day&Night

Mode

Delay

D N Level

N D Level

Smart IR

Smart IR Level

Image

Sharpness

Color Gain

Freeze

Flip

Defog

Special

Output mode

Black Level

Privacy

Lens Adj (Service only)

Reset

Version

Exit

Configure OSD menu options using the integrated 

OSD joystick on the camera cable (see image to the 

right).

To use the OSD menu:

•  OPTIONAL

: Connect a test monitor to the camera’s 

analog (yellow) BNC connector.

•  Push the middle of the joystick to open the  

OSD menu.

•  Move the joystick   /   to select a setting, then   /    

to change the setting value. 

•  Push the middle of the joystick to confirm selection.
•  Arrows beside settings indicate a submenu (

). Select the 

setting and push the joystick to enter. 

•  Select 

RETURN

 and push the joystick to return to the  

previous menu, or 

EXIT

 from the main menu to exit.

See the full OSD menu tree below. For detailed explanation 

of camera settings, see the OSD manual under the product’s 

Downloads

 tab at

 

www.flir.com/security/mpx

.

On-Screen Display (OSD) Menu

WDR Function Notice

WDR is not supported in analog output mode.

MULTI-FORMAT

Package Contents

MODEL:  

C347VC2 SERIES

QUICK START GUIDE

English Version 1.0

flir.com/security/mpx

FLIR Systems, Inc., Copyright © 2016 

As our products are subject to continuous improvement, FLIR Systems 
Inc. reserves the right to modify product design, specifications and 
prices, without notice and without incurring any obligation. E&OE

Safety Precautions

•  Use an appropriate low-voltage power cable to 

prevent fire or electrical shock.

•  Make sure to install the camera in an area that can 

support the camera weight.

•  There are no user serviceable parts inside the 

camera. Please do not disassemble the camera.

•  Do not clean the lens cover with an abrasive cleaning 

material. Please use a soft cloth to clean the lens 

cover.

•  Camera is rated for outdoor use (IP66), but is not 

intended for submersion in water.

•  Do not point the cameras directly towards the sun or 

a source of intense light.

2.1MP CNV Motorized Varifocal 

Vandal Dome Camera

•  1

×

 2.1MP CNV Motorized Vandal Dome Camera

•  4

×

 Mounting Screws 

•  4

×

 Drywall Anchors

•  1

×

 Allen Key

•  1

×

 Mounting Template

NOTE:

 

Power adapter not included.

C347VC2_QSG_EN_R1

FCC Notice

This equipment has been tested and found to comply with the limits 

for a Class A digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area 

is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

C347VC2_QSG_EN_R1.indd   1

11/15/2016   5:16:36 PM

Отзывы: