3. Configure the following settings for snapshots saved automatically from motion detec-
tion or the snapshot schedule:
•
Channel
: Select the channel you would like to configure.
•
Mode
: Select
Timing
for the system to take snapshots according to the snapshot
schedule (see 16.3.16
Configuring the Snapshot Schedule
, page 62) Select
Trig-
ger
for the system to take snapshots only when triggered by motion detection
(snapshot must be enabled in the Motion Detect menu (see 16.3.7
•
Image Size
: Select the resolution for snapshots.
•
Image Quality
: Select the snapshot image quality between
1
(lowest) and
6
(highest)
•
Snapshot Frequency
: Select the number of snapshots (up to 6) the system will
take each time.
4. Click
OK
to save changes.
16.1.5
Creating Custom Channel Names
You can assign custom names to your cameras. For example, you can name your cameras
based on their location (e.g. hallway or front door).
To create custom channel names:
1. From the Main Menu, click
and select
Channel Name
.
2. Enter a custom name for each channel.
3. Click
OK
to save changes.
#LX400057; r. 1.0/24460/24461; en-US
43