FLIR GF7 Series Скачать руководство пользователя

Страница: 88 / 132

Handling the camera

6. It is good practice to disconnect the USB battery charger from the mains socket when

the battery is fully charged.

Note

When closing the cover for the connector compartment, firmly press along the

edges of the cover to make sure that it closes tightly.

21.1.4

Charging the battery using a USB cable connected to a computer

Follow this procedure:

1. Open the cover for the connector compartment at the bottom of the camera.
2. Connect a USB cable to the USB-C connector in the connector bay. Connect the oth-

er end of the USB cable to the computer.

Note

• To charge the camera, the computer must be turned on.
• Charging the camera using a USB cable connected to a computer takes

considerably

longer than using the USB battery charger or the stand-alone battery charger. If the
camera is on, it may use more power than the computer provides.

• When closing the cover for the connector compartment, firmly press along the edges

of the cover to make sure that it closes tightly.

21.2

Installing and removing the camera

battery

21.2.1

Installing the battery

Note

Use a clean, dry cloth to remove any water or moisture on the battery before you

install it.

21.2.1.1

Procedure

1. Push the battery into the battery compartment. The battery makes a click when it

locks in place.

21.2.2

Removing the battery

Note

Use a clean, dry cloth to remove any water or moisture on the camera before you

remove the battery.

1. Turn off the camera.

#T810411; r. AC/70277/70566; en-US

Содержание GF7 Series





































































































































Результаты поиска

Содержание GF7 Series

Отзывы:

Похожие инструкции для GF7 Series

Бренды по названию

Популярные бренды

FLIR GF7 Series, Руководство пользователя

Результаты поиска

Содержание GF7 Series

Отзывы:

Похожие инструкции для GF7 Series

Бренды по названию

Популярные бренды