427-1065-00-12 Revision 130
November 2019
15
This document does not contain any export-controlled information.
Basic Operation and Configuration
b Unzip the utility, then double-click to run the executable file ( DNA
.exe
). All the units on
the VLAN are discovered.
c For additional instructions on using DNA, refer to the DNA User’s Manual available in the
Help ( ) link while the software is running.
Step 4
Right-click on the camera, select
IP
Setup
to change the IP address. When
set to DHCP, If a DHCP server is not
available on the network, the IP address
will default to
192.168.0.250
.
Step 5
Double-click the camera in DNA’s
Discovery List
to open the camera’s
web server
Login
page in Internet
Explorer or point your web browser to
the camera’s IP address.
Step 6
Enter the default user name (
admin
) and password (
admin
) to open the
Live Video
page.
Refer to
2.3.1
Log in to the Camera Web Page
With a web browser, log in to the camera using one of three User Names:
user
,
expert
, and
admin
.
By default, the passwords are:
user
,
expert
, and
admin
, respectively. Login passwords should be
changed (
admin
login required) to prevent unauthorized access (refer to
).
Online manual
Select IP Setup
Right-click
