Elara FR-345-EST QIG Rev 110
December 2020
This document does not contain any export-controlled information.
Elara™ FR-345-EST
Quick Install Guide
1 Check Contents
Make sure all of the items above are included in the camera kit.
2 Select a Location
Select a suitable location to mount the camera.
The focus for both of the camera's sensors is fixed at one meter (39.4"). If it will be
used in EST screening mode, make sure to install the camera so that the faces of
persons being screened for EST are 1m ± 0.2m (39.4" ± 7.9") away from the front
of the camera.
Verify that the operating temperature is 15°C to 45°C (60°F to 110°F), 0-95%
relative humidity. The camera provides optimal performance in a stable
environment near 22°C (72°F).
For further advice on positioning and orienting the camera, see the camera's
installation and user guide.
3 Configure the Camera
FLIR recommends configuring the camera on a bench or in a lab before mounting
and aiming it. However, it is also possible to configure the camera after mounting
it, which could be more appropriate for certain installations.
3.1 Install the FLIR DNA tool
To discover the camera on the network, FLIR recommends using the FLIR
Discovery Network Assistant (DNA) tool. Version 2.3.0.19 or higher supports Elara
FR-345-EST, does not require a license to use, and is a free download from
