FLIR E75, Руководство пользователя

Страница: 119 / 300

Changing settings 25
25.1.4 Save options & storage
• Preview image before saving : This setting defines if a preview image will be displayed
before the image is saved.
• Add annotation after saving : This setting defines if an annotation tool will be displayed
when the image has been saved. Available options are:
◦ Save : No annotation tool will be displayed.
◦ Save & add note : The note annotation tool will be displayed.
◦ Save & add table : The table annotation tool will be displayed.
◦ Save & add voice annotation : The voice annotation tool will be displayed.
◦ Save & add sketch : The sketch annotation tool will be displayed.
◦ Save & add any annotation : The annotation tool menu will be displayed.
• Image resolution : This setting defines the resolution of the images captured by the cam-
era. Available options are Normal and UltraMax . For more information, see section
12.1.4 About UltraMax , page 53.
• Video compression : This setting defines the storage format for video clips. Available
options are:
◦ Mpeg (*.mpeg) : MPEG recordings cannot be edited after the file has been saved.
◦ Radiometric storage (*.csq) : A CSQ file supports full radiometry but is only sup-
ported by FLIR Systems software. The file does not include any visual image infor-
mation. With this setting, only
Thermal image mode is supported when recording
video.
• Photo as separate JPEG : For the Thermal MSX , Thermal , and Picture in picture image
modes, a visual image is always saved in the same JPEG file as the thermal image. En-
abling this setting saves an extra low-resolution visual image as a separate JPEG file.
• Digital camera : This setting is used to turn on/off the digital camera. Turning off the digi-
tal camera can for example be required in restricted areas and in confidential (e.g. doc-
tor/patient) situations. When the digital camera is off, the images modes
Thermal MSX
and Picture in picture are disabled.
• Measure distance : This setting defines if the laser distance meter will be used to meas-
ure the distance when an image is saved. With this setting, the Object distance param-
eter (see section 16.5 Changing the measurement parameters , page 77) in the image
data is automatically updated with the measured distance when an image is saved.
(There is no effect on the
Object distance setting in live mode.)
• File naming format : This setting defines the naming format for new image/video files.
The setting has no impact on already saved files in the archive. Available options are:
◦ DCF : DCF (Design rule for Camera File system) is a standard that specifies the nam-
ing method of image files (and much more). With this setting, the name of a saved
image/video file will be FLIRxxxx, where xxxx is an incremental counter. Example:
FLIR0001.
◦ Date prefix : A prefix will be added to the filename, including the date and the text
“IR_” for images and “MOV_” for videos. Examples: IR_2015-04-22_0002 and
MOV_2015-04-22_0003. The date format will follow the
Date & time format setting,
see section 25.1.5 Device settings , page 108.
Note With the Date prefix setting, the files may not automatically be detected by
third-party applications.
• Delete all saved files... : This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to cancel
the delete action.
#T810190; r. AJ/46209/46209; en-US
107