FLIR E70290 Скачать руководство пользователя страница 47

Страница: 47 / 136

6.6 Switching on the simulator —

Wi-Fish

™

app

The simulator may be used to familiarize yourself

with the features and functions of the product.
With the

Wi-Fish

™

mobile app connected to your

Wi-Fish

™

unit and running:

1. Select

2. Select

Settings

3. Select

Simulator

4. Select On to switch simulator mode on, or
5. Select Off to switch the simulator mode off.
In simulator mode the app will have the same

functionality, however simulated sonar data is

displayed instead of live sonar data.

6.7 Opening the MicroSD card reader

cover

The MicroSD card reader is located on the rear of the

unit. The card reader is protected by a weatherproof

cover.

1. Cover closed
2. Opening cover
3. Cover open
1. Open the card reader cover by pulling backwards

on the cover’s handle until the cover is positioned

as shown in (3) above.
The cover has a tight it and may require some

force to open the cover.

2. Fully close the card reader cover.

Important:

When closing the cover ensure that it

is fully pushed in and sealed all the way around

the edge, this will provide the weatherproof seal.

Removing MicroSD card from its adaptor

MicroSD memory and cartography chart cards are

usually supplied inserted into an SD card adaptor.

The card will need to be removed from the adaptor

before inserting into your display.

Wi-Fish

™

Содержание E70290









































































































































Результаты поиска

Содержание E70290

Отзывы:

Похожие инструкции для E70290

Бренды по названию

Популярные бренды

FLIR E70290, Инструкция по установке и эксплуатации

Результаты поиска

Содержание E70290

Отзывы:

Похожие инструкции для E70290

Бренды по названию

Популярные бренды