FLIR E70290, Инструкция по установке и эксплуатации

Страница: 45 / 136

6.3 Wi-Fish
™
mobile app
The Wi-Fish
™
mobile app is available on iOS 7 or
greater and Android 4 or greater. The app must be
used to control the Wi-Fish
™
sonar module.
The Wi-Fish
™
app can be downloaded from the
relevant app store for your device.
Connecting Wi-Fi — Wi-Fish
™
1. Install the Wi-Fish
™
app from the relevant app
store.
2. Connect your smart device’s Wi-Fi to the
Wi-Fish
™
unit.
The product’s unique network name, known as
the SSID (Service Set Identiier) and Passphrase
for your product can be found on the product label
ixed to the bottom of the unit. It is recommended
that you take note of these and retain somewhere
safe for future reference.
3. Open the Wi-Fish
™
app.
Connecting your smart device
Your smart device’s Wi-Fi connection must be
connected to the product to enable use of the mobile
Wi-Fish
™
app.
With the Wi-Fish
™
mobile app installed on your
smart device:
1. Open the Wi-Fi settings on your smart device
and select your product’s SSID from the list of
available devices.
Your product’s SSID can be found on the product
label located on the bottom of the unit.
2. Enter your product passphrase.
Your product’s passphrase can also be found on
the product label located on the bottom of the
unit.
3. Your device will now connect to the unit and
obtain an IP address.
4. Once your device is connected you can open the
Wi-Fish
™
app.
Wi-Fish
™
45