FLIR E70290 Скачать руководство пользователя страница 36

Страница: 36 / 136

5.1 General cabling guidance

Cable types and length

It is important to use cables of the appropriate type

and length
• Unless otherwise stated use only standard cables

of the correct type, supplied by Raymarine.

• Ensure that any non-Raymarine cables are of the

correct quality and gauge. For example, longer

power cable runs may require larger wire gauges

to minimize voltage drop along the run.

Routing cables

Cables must be routed correctly, to maximize

performance and prolong cable life.
• Do NOT bend cables excessively. Wherever

possible, ensure a minimum bend diameter of 200

mm (8 in) / minimum bend radius of 100 mm (4 in).

• Protect all cables from physical damage and

exposure to heat. Use trunking or conduit where

possible. Do NOT run cables through bilges or

doorways, or close to moving or hot objects.

• Secure cables in place using tie-wraps or lacing

twine. Coil any extra cable and tie it out of the way.

• Where a cable passes through an exposed

bulkhead or deckhead, use a suitable watertight

feed-through.

• Do NOT run cables near to engines or luorescent

lights.

Always route data cables as far away as possible

from:
• other equipment and cables,
• high current carrying AC and DC power lines,
• antennae.

Strain relief

Ensure adequate strain relief is provided. Protect

connectors from strain and ensure they will not pull

out under extreme sea conditions.

Cable shielding

Ensure that the cable is properly shielded that the

cable shielding is intact (e.g. hasn’t been scraped off

by being squeezed through a tight area).

5.2 Connections overview

Dragonly-4

Dragonly-5

Dragonly-7 Pro

Wi-Fish

™

products and the

CPT-DV

and

CPT-DVS

include connectors with a 3 keyway guide.

Depending on date of manufacture

Dragonly 6

Dragonly 7

products and

CPT-60

CPT-70

CPT-80

transducers are available with 1 keyway guide

(Legacy) or 3 keyway guide (Updated). Adaptor

cables can be used to connect 1 keyway connectors

to 3 keyway connectors.

Rear connector / Locking collar

Connector

Description

Unit /

Display

Compatible

transducer

Red – 1

keyway

• Legacy

Dragonly

• Legacy

Dragonly

• Legacy

CPT-60

• Legacy

CPT-70

• Legacy

CPT-80

Green – 3

keyway

•

DVS

•

Pro

• Updated

Dragonly

• Updated

Dragonly

•

CPT-DVS

• Updated

CPT-60

• Updated

CPT-70

• Updated

CPT-80

Yellow – 3

keyway

•

Wi-Fish

™

•

CPT-DV

Black – 3

keyway

•

5 M

• N/A –

power

connector

Dragonly–4 / Dragonly–5 / Dragonly–7 / Wi–Fish

Содержание E70290









































































































































Результаты поиска

Содержание E70290

Отзывы:

Похожие инструкции для E70290

Бренды по названию

Популярные бренды

FLIR E70290, Инструкция по установке и эксплуатации

Результаты поиска

Содержание E70290

Отзывы:

Похожие инструкции для E70290

Бренды по названию

Популярные бренды