FLIR E70290, Инструкция по установке и эксплуатации

Страница: 28 / 136

• Allow enough room for display angle adjustment.
• Allow enough head room to remove the display
from the bracket.
Product dimensions – Dragonly–7
Care points:
• For variants with built-in GPS, install in a location
where the GPS performance will not be affected
by vessel structure; test GPS performance before
installation.
• Allow a minimum of 120 mm (4.7 in.) behind the
display for inserting and removing a MicroSD card.
• Allow enough room for display angle adjustment.
• Allow enough head room to remove the display
from the bracket.
Product dimensions — Wi-Fish
™
Care points:
• Allow of minimum of 120 mm (4.7 in.) behind the
unit for inserting and removing an MicroSD card.
• Allow enough room for unit angle adjustment.
• Allow enough head room to remove the unit from
the bracket.
3.13 Installation process
The steps listed below are required to successfully
install your product and ensure optimum
performance.
1. Mounting the transducer.
2. Mounting the display.
3. Testing the transducer.
4. Finishing the transducer mounting.
28
Dragonly–4 / Dragonly–5 / Dragonly–7 / Wi–Fish