March 10, 2019
80
Accessing the CM-330X via a Web Browser
CM-3304/CM-3308 User and Installation Guide
The
Video Analytics > Loitering
screen is used for configuring the loitering analytic capability.
This page allows you to:
·
Configure a loitering detection area using 3 to 8 points
·
Reset Max and Min Object size
·
Define Loitering Time
·
Configure advanced settings, including sensitivity, area masking, reset scene and arming schedule
·
Analytics actions
Use the Loitering rule to monitor an area with relative light traffic, but in which an extended stay is
prohibited. For example, the area around an ATM or in front of a door, where people are expected to move
through and not linger for a long time.
Draw a line around the protected area, forming a closed shape. The minimum loitering duration can be up
to 300 seconds.
See the
section for more information on the setup process:
Zone Settings:
This section allows the user to create an area using between 3 and 8 points in order to configure the
desired space
Clicking on the video scene will produce points for area creation. Once three points are selected, a full area
will appear. Clicking more, will create more points creating more complex shapes up to 8 points
Pressing the
Delete
button
clears the area entirely, starting the area configuration from nothing.
Basic Settings:
For general "Basic Settings" see
Loitering Time
