FLIR CF-5212, Руководство пользователя и инструкция по установке

Страница: 117 / 132

Configuration and Operation
April 25, 2017 CF-5212/CF-5222 User and Installation Guide 107
Refer to the
HTML Edition Units User’s Guide
for detailed instructions on configuring these settings.
Backup & Restore
The Backup & Restore
screen enables you to create backup files of the unit’s analytics settings and
to restore them.
Figure 104: Analytics > Backup & Restore Screen
To back up the analytic firmware file
1. Click BACKUP .
To restore the analytic firmware file
1. Do one of the following:

To restore factory defaults, select To factory defaults.

To restore all defaults from a stored file, select Full restore from file, click Browse to
locate the file path , then select the file.

To restore analytic settings from a stored file, select Analytic settings from file, click
Browse to locate the file path , then select the file.
2. Click RESTORE .
Note:
Analytics firmware is stored in a separate file than the camera system software. To
backup and restore the camera system software version, see
System > Factory Default .
Refer to the HTML
Edition Units User’s Guide
for detailed instructions on configuring these settings.