FLIR Blackfly S, Руководство по установке

Страница: 33 / 50

5 Blackfly S Physical Interface
5.11 Non-Volatile Flash Memory
The camera has 6 MB flash memory for users to store data.
Title Article
Storing data in on-camera flash memory Knowledge Base Article 10370
Related Knowledge Base Articles
5.12 Dust Protection—Cased Models
The camera housing is designed to prevent dust from falling directly onto the sensor's protective glass surface. This is
achieved by placing a piece of clear glass (monochrome camera models) or an IR cut-off filter (color models) that sits
above the surface of the sensor's glass. A removable plastic retainer keeps this glass/filter system in place. By increasing
the distance between the imaging surface and the location of the potential dust particles, the likelihood of interference
from the dust (assuming non-collimated light) and the possibility of damage to the sensor during cleaning is reduced.
Warning! Cameras are sealed when they are shipped. To avoid
contamination, seals should not be broken until cameras are ready
for assembly on site.
Warning! Use caution when removing the protective glass or filter.
Damage to any component of the optical path voids the Hardware
Warranty. Removing the protective glass or filter alters the optical
path of the camera, and may result in problems obtaining proper
focus with your lens.
Title Article
Removing the IR filter from a color camera Knowledge Base Article 10080
Selecting a lens for your camera Technical Application Note 10694
Related Knowledge Base Articles
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide 29