FLIR B6 series, Руководство пользователя

Страница: 72 / 326

13.5 Turning on the camera
Procedure
To turn on the camera, push and release the button.
Related topics
For locations of camera buttons, see section 9 – Camera parts on page 21.
13.6 Turning off the camera
Procedure
To turn off the camera, push and hold the button for more than two seconds.
■
■
To display a dialog box where you can choose to put the camera in standby mode,
briefly push the button. This dialog box will disappear in 10 seconds.
Related topics For locations of camera buttons, see section 9 – Camera parts on page 21.
13.7 Setting power save mode
Procedure
When the camera is on, push and release the On/Off button to set power save mode.
NOTE
If you do not use the camera, the camera will enter power save mode after a time
period that you can set in the menu system. After several hours in power save mode
the camera power turns off.
Related topics
For locations of camera buttons, see section 9 – Camera parts on page 21.
■
■
For information about setting power save mode, see section 22.3.7 – Changing
settings for power management on page 142.
13
54
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
13 – Handling the camera