Setup via keypad and monitor
> Setting compression parameters
8
Setting compression parameters
By default, streaming video is available at a frame rate of 30 fps and with D1 resolution in H.264. The bit rate is 2
Mbps.
Via VIEWCOM/E MAX+, multiple users can view streaming video simultaneously. The board supports both unicast and
multicast streaming. For more information on the multicast function, please contact FLIR Intelligent Transportation
Systems or your system administrator.
To set the RTSP port for streaming video
1
Select
Streaming
>
RTSP Port
.
2
Enter a value between 1 and 65535.
3
Press the
Escape
key.
To change the compression type
1
Select
Streaming
>
Video 1
or
Video 2
.
2
Use the
Arrow
keys to change the
Encoding
to
H264
,
MJPEG
or
MPEG4
.
3
Press the
Escape
key.
To change the compression parameters
1
Select
Streaming
>
Video 1
or
Video 2
.
2
Use the
Arrow
keys to change
Bit rate
or
Frame rate
.
3
Press the
Escape
key.
To activate the multicast function
1
Select
Streaming
>
Video
>
Multicast
.
2
Use the
Arrow
keys to set
Multicast
to
On
.
3
Select
Multicast IP
and enter a new address.
4
Enter the
Multicast Port
(between 1 and 65535) that sends out the rtp stream.
5
Enter the
Multicast TTL
(i.e. Time To Live, between 1 and 254).
6
Press the
Escape
key.
To change the resolution
1
Select
Streaming
>
Video 1
or
Video 2
.
2
Use the
Arrow
keys to change the
Resolution
to
D1
,
VGA
,
QVGA
,
CIF
or
QCIF
.
3
Press the
Escape
key.
