FLIN FLINflex 50W, Руководство по эксплуатации и технике безопасности

Страница: 8 / 28

FLINflex
FLIN solar GmbH - Christianspries 30, 24159 Kiel
+49 0431 60109038 - info@flin-solar.de
7
EN
6.2 Cables
The connection cables of the solar modules are equipped with seawater-proof MC4 plugs and have
a standard length of 1m. You can choose between different cable variants. We can also supply
customised cable lengths on request.
7 Setup
The FLINflex is delivered to you as a fully assembled system. The installation on board depends on
the selected configuration. The following explanation is therefore divided according to the different
mounting systems. It is recommended to carry out the first commissioning when there is no wind
and no waves. The alignment of the FLIN-flex modules should be towards the sun if possible. If the
solar power is less than 600W, any number of panels can be connected in series. FLIN solar panels
of different sizes can also be combined. A wiring example can be found in the in the download
section of our website.
7.1 FLINflex-standard
The FLINflex-standard has no further fastening options. For example, it can be screwed to the deck
via the approx. 25 mm wide edge or used flying. It is important to note that a minimum distance of
10 mm to the solar cell is taken into account when screwing. In this way, damage and the resulting
reduction in solar power can be avoided.
7.2 FLINflex-snap
The FLINflex-snap is preferably used on fabric surfaces such as sprayhoods or bimini tops. For this
purpose, have your sailmaker insert the Loxx connectors in the desired places. Then the FLINflex-
snap can be mounted and dismounted very quickly.
Dy
ne
e
ma
S
of
t
•Dyneema sheathed
soft cable
•Robustness,
flexibility, durability
S
ola
r
S
tanda
rd
•Double insulated
cable
•Inexpensive,
robustness,
durability
P
hili
ppi
-M
C4
•Adapter cable
•MC4 to series 692
from Philippi