Flight Medical Innovations FLIGHT 50 Скачать руководство пользователя страница 24

Страница: 24 / 103

Operator's Manual

3-2

3.1.3 Changing between Pressure Control and Volume Control

The Pressure Control and Volume Control buttons function differently when
in A/CMV or SIMV in On condition compared to when in SPONT mode in On
condition or Settings condition.

3.1.3.1

On Condition: A/CMV or SIMV

1. Select—Adjust (

▲

Up /

▼

Down)—Accept

2. Select the Pressure Control or Volume Control button.

The LED indicator and the target value blink.

3. Adjust the blinking target value for the selected control with the

▲

Up /

▼

Down buttons.

4. Press the desired control button (Volume or Pressure) a second time to

accept the new control and target value.

3.1.3.2

On Condition: SPONT or Setting Condition: A/CMV, SIMV, or
SPONT

1. Select—Adjust (

▲

Up /

▼

Down)—Accept

2. Select the Pressure Control or Volume Control button.

The LED indicator and the target value blink.

3. Adjust the blinking target value for the selected control with the

▲

Up /

▼

Down buttons.

4. To accept the new control and target value, either:



Press the selected button again.



Press another button to select a new parameter for adjustment.



Wait 5 seconds without making a change.

The transition to a new pressure or volume target may

require several breaths.

3.1.4 Changing a Parameter (or Multiple Parameters)

1. Select—Adjust (

▲

Up /

▼

Down)—Accept.

2. Select the parameter by pressing the labeled button (i.e. ƒ, P trig, etc).

The parameter’s numeric display blinks.

3. Adjust the numeric value with the

▲

Up /

▼

Down buttons.

4. To accept the value, either:



Press the selected button again.



Press another button to select a new parameter for adjustment.



Wait 5 seconds without making a change.

Содержание FLIGHT 50








































































































Результаты поиска

Содержание FLIGHT 50

Отзывы:

Похожие инструкции для FLIGHT 50

Бренды по названию

Популярные бренды

Flight Medical Innovations FLIGHT 50, Руководство оператора

Результаты поиска

Содержание FLIGHT 50

Отзывы:

Похожие инструкции для FLIGHT 50

Бренды по названию

Популярные бренды