Flight Data Systems FDS 400-301 Скачать руководство пользователя страница 26

Страница: 26 / 61

Operation

Operators manual

Handheld Multi-Purpose Interface (HHMPI)

Figure 15.0 Decompressing Honeywell CVR file away from the aircraft

After the decompression completes, the raw CVR file and the waveform files from each

channel will be available on the nominated storage device. These files can be transferred

to a computer or another device where they can be replayed. A codec may need to be

installed, this is included as part of the HHMPI kit.

4.3.4 Using the CVR rack adapter

To download the CVR data, record mode must be disabled. Without disabling record

mode, you cannot download CVR data. Use the CVR rack adapter to power the CVR from

aircraft power by plugging it into aircraft power and then into the rear of the CVR. Once

powered, recording is disabled on the CVR and the data is ready to download.

4.3.4.1 Using the Honeywell CVR Rack Adaptor part number FDS400-215



Firstly ensuring no power is provided to the CVR, disconnect the aircraft power from

the back of the Honeywell CVR while in the rack.



Connect the CVR Rack adaptor into the back of the CVR and reconnect aircraft power

to the CVR Rack adaptor instead.



Power the CVR at the aircraft and then connect the HHMPI interface cable (connected

to the Rack Adaptor) to the HHMPI and start up the unit.



With CVR recording now disabled using the Rack Adaptor ensure the blue plane

appears in the HHMPI and begin a CVR download at the aircraft.

4.3.4.2 Using the L-3 CVR Rack Adaptor part number FDS400-247



The L-3 CVR Rack Adaptor is almost the same design as the Honeywell. The difference

is it doesn't have nor require the Interface cable connection to the HHMPI.



Connect the L-3 CVR Rack Adaptor the same way as instructed with the Honeywell

CVR Rack Adaptor. Ensure Aircraft power is switched off to the CVR when plugging in

the adaptor to the CVR then the aircraft power connection.



Using the additional cable - The FA2100 Interface Cable P/N FDS400-202 insert this

into the CVR front GSE connector and then into the HHMPI. Power the CVR and

power the HHMPI. Ensure the blue plane appears in the HHMPI and begin a CVR

download at the aircraft.

4.4 Viewing live flight

data

The HHMPI can be used to monitor live ARINC 717 data from the aircraft. The Live Data

View can display data from the FDR in five formats:

Содержание FDS 400-301






























































Результаты поиска

Содержание FDS 400-301

Отзывы:

Похожие инструкции для FDS 400-301

Бренды по названию

Популярные бренды

Flight Data Systems FDS 400-301, Руководство оператора

Результаты поиска

Содержание FDS 400-301

Отзывы:

Похожие инструкции для FDS 400-301

Бренды по названию

Популярные бренды