Fliegl TDMK 160 PROFI Скачать руководство пользователя страница 49

Страница: 49 / 80

Three-way dumper

Use and operation

Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany

47 of 81

7. Use and operation

Read carefully. If there is anything you do not understand, please contact the
manufacturer to exclude the possibility of operating errors.

7.1 Trailer operation

When coupling the trailer, there is a risk of crushing between the trailer
and the towing vehicle.

Before manoeuvring, ensure that there is nobody between the towing
vehicle and the trailer.

Always use a signaller for manoeuvring.

Never walk between the towing vehicle and the trailer while the towing
vehicle is moving.

Before coupling, secure the towing vehicle and trailer to prevent rolling
away, and apply the hand brake or wheel chocks under the wheels.

7.1.1 Before operation

Instruct unauthorised persons away from the machine.

Carry out a visual inspection of the entire machine and the tools.

Check the fill levels of lubricants and auxiliary materials.

Unlock all devices used for stopping in an emergency.

When connecting hydraulic hoses to the tractor hydraulics, ensure that the
hydraulics are depressurised on both the tractor and trailer side.

When coupling and uncoupling, ensure that the couplings of the hydraulic hoses
are/do not become dirty.

7.1.2 Setting up the trailer coupling on the towing vehicle

Move the towing device of the towing vehicle to
the correct height.

Position the trailer coupling (A) on the towing
vehicle so that the trailer is horizontal when it is
hitched.

Fig. 36

Setting up the trailer coupling on the towing

vehicle

Содержание TDMK 160 PROFI

















































































Результаты поиска

Содержание TDMK 160 PROFI

Отзывы:

Похожие инструкции для TDMK 160 PROFI

Бренды по названию

Популярные бренды

Fliegl TDMK 160 PROFI, Руководство по эксплуатации

Результаты поиска

Содержание TDMK 160 PROFI

Отзывы:

Похожие инструкции для TDMK 160 PROFI

Бренды по названию

Популярные бренды