Use and operation
55
7.2.5
Tipping linchpins
The tandem three-way tipper is equipped with two tipping linchpins, which prevent
accidental diagonal insertion.
-
The tipping linchpins must be inserted in the side of
the tipper before the tipping operation.
-
Accidentally inserting the bolts diagonally is prevented
with correct guide plates.
-
The tipping linchpins are to be secured with the spring
inserts, which are fitted on the link chains within the
guide plate.
Rear
Front
Fig. 41 Tip bearings
7.2.6
Tipping processes
-
The two linchpins must always be inserted on the desired tipping side.
Once the plug-in coupling has been connected to the towing vehicle with
at least 150 bar
and
a sufficient amount of oil is present, the tipping process can be started.
-
When tipping, the tipper must be securely connected to the towing vehicle.
-
The tipping process can also be started with the hand pump (optional equipment).
-
When tipping, particularly to the rear, the trailer must be resting on a weight-bearing,
horizontal surface.
-
Carefully lock/unlock the tipper storage area.
-
Once tipping has been completed, always lower the loading surface completely.
Do not leave unattended when raised.
-
Be careful with loads that do not slide easily.
-
No persons must be in the danger area during the tipping process.
Rear tip
bearing
Guide plate
Spring cotter pin
Tipping linchpin
Tip bearings
Front
Tipping
linchpin
Guide plate
Spring cotter pin
