___________________________________________________________________________________________________
Printed In Canada 01524r10.doc TAC2000/TAC3000 Manual 12/03/2009 Page
1
1.1.
INTRODUCTION
This manual (
P/N 01524
) is produced to assist in
the installation, operation and maintenance of
Flexxaire
®
TAC2000-P, TAC3000-P, TAC2000-H and
TAC3000-H Series Fan Systems.
Flexxaire has made every effort to ensure that the
information contained in this manual is correct and
complete at the time of printing. Flexxaire will
assume no responsibility for any errors or omissions.
If you have any questions regarding this manual or
any other document provided with your fan system,
please contact:
Flexxaire
Product Support Department
10430-180 Street
Edmonton, Alberta, Canada
T5S-1C3
Phone: 780-483-3267
Fax: 780-483-6099
Toll Free: 866-489-3267
1.2.
IMPORTANT SAFETY
INFORMATION
The safety information in this publication is to be
used in conjunction with the safety information
supplied from the original machine manufacturer.
Please refer to all safety information supplied, prior
to doing any work on the fan assembly or any other
component to assure safety.
Improper operation, maintenance or repair of
this product can be dangerous and could
result in injury or death.
Always use Flexxaire parts and components or
Flexxaire approved parts and components. The use
of unapproved parts and/or components will void
the 1-year warranty.
Do not operate or perform any maintenance
on this product until you have read and
understand the operation and maintenance
information. Please contact Flexxaire or an
approved dealer for any information that you
may require.
The person(s) servicing the product may be
unfamiliar with many of the systems or
components on the product. This makes it
important to use caution when performing
any type of service work. A knowledge of the
product and/or its components is important
before the removal or disassembly of any
component.
1.2.1.
PROTECTIVE EQUIPMENT
Always wear protective glasses, protective shoes
and any other protective equipment as required by
job conditions when working around this product.
1.2.2.
PRESSURIZED FAN HUB
The hub assembly is spring loaded. If disassembly
of the hub is required, take caution that you are well
protected from the hub’s release which may be
sudden and pose an impact related injury.
Also make sure that the internal pressure is
released. Consult the pneumatic or hydraulic control
instructions.
1.2.3.
HOT FLUIDS AND PARTS
To avoid burns, be alert for hot parts on the
assembly or the machine that have just been
stopped and have hot fluid in lines, tubes and
compartments.
1.3.
PRODUCT SUPPORT
The Flexxaire Product Support Department provides
technical support, information on fan installation and
maintenance, parts, instruction manuals, and is
responsible for warranty administration. Contact the
Product Support Department for any problems that
this technical manual does not address.
Phone: 780-483-3267 or 780-930-6836
Monday to Friday 8:00 am to 4:00 pm MST
1.4.
FAN SPECIFICATIONS
The following needs to be considered prior to the
installation of the Flexxaire Fan System. If your
situation is listed in this section,
DO NOT INSTALL
THE FAN.
Damage and/or injury may occur.
1.4.1.
MOUNTING
WARNING:
This fan is not designed to be
mounted onto a crank shaft or crank shaft pulley.
Torsional vibration from crankshafts will damage the
fan and could result in machine damage and serious
injury.
epcatalogs.com
