Flexitron WebdynEasy W M-Bus Скачать руководство пользователя страница 26

Страница: 26 / 96

[email protected] |

webdyn.com

V2.0 subject to changes | Webdyn © by Flexitron Group

2.4.3 Cellular Network

The WebdynEasy W M-Bus hub includes a 2G, NB-IoT and LTE-M network compatible modem.

2.4.3.1 Antenna

The hub has a female SMA connector labelled “4G” on the board to connect a modem antenna. The

product is delivered with an internal antenna. An external antenna can be connected to the product. To

do this, unscrew the cap on the box and fit a M16*1.5 cable gland (not included).

If the WebdynEasy W M-Bus hub were to be installed in a metal box or in a location that does not

have proper signal reception, the use of a remote antenna is strongly recommended. Be careful to use

an antenna compatible with the connector and frequencies used.

In the new box, the cable gland is optional and is installed after breaking the breakable part provided in

the box.

End users must make sure their installation using remote antennas meets applicable EMC

standards.

2.4.3.2 SIM Card

To use the LTE-M, NB-IoT or 2G modem connection to allow the hub to communicate with the remote

server, the box must be opened(see section2.3.1: “Opening/closing the box”) and a mini SIM card

inserted into the SIM card housing inside the hub.

The hub is compatible with all market operators as well as with all mini SIM 2FF 25 x 15mm format SIM

cards.

Содержание WebdynEasy W M-Bus

































































































Результаты поиска

Содержание WebdynEasy W M-Bus

Отзывы:

Бренды по названию

Популярные бренды

Flexitron WebdynEasy W M-Bus, Руководство пользователя

Результаты поиска

Содержание WebdynEasy W M-Bus

Отзывы:

Бренды по названию

Популярные бренды